PEX Repipe and Slab Leak Repairs San Marcos, CA
A Copper or PEX Repipe is the treatment where your existing water pipes in your home or a building are upgraded with new ones. All water pipe fittings, supply lines and water valves are replaced. this normally leads to even better water pressure and a great deal better water quality.
Should I Repipe our home in San Marcos?
There are many reasons for why you needs to replace the piping in your house.
For residences with galvanized water lines:
Galvanized plumbing are located in homes built through the 80s. A galvanized pipe is an iron water line which is zinc coated to be protected from corrosion. The fact is that the zinc coating slowly corrodes over the years exposing the iron, along with oxidation build-up.
Recognizable Slab Leak Symptoms:
Very Low Water Pressure – The particular reason why may be the restriction in the water flow a result of corrosion and rust build-up in the galvanized water pipe.
Rust Color Water – Oxidation often goes into the water fixtures. This means that an advanced stage of deterioration in your piping.
Leaky Pipes – Leaks are a result of corrosion of the galvanized pipes. Unknown leaking can develop inside the walls, within the attic and underneath the home, generating the chances of serious damage to your property.
For households with polybutylene water pipe:
This particular plastic pipe was regularly used from the mid 70’s to the mid 90’s. It was considered to be the next plumbing technology advance for pipes and water fixtures. Polybutylene water line systems were installed in millions of houses prior to being listed as highly faulty. Almost 50% of most properties constructed in this period of time is still equipped with this variation of pipe in the house.
Polybutylene pipes have an extremely brief life span, because harsh chemicals in standard city water causes it to solidify and become brittle. The fittings normally burst open first, and afterwards the water pipe itself.
Polybutylene water pipes are made up of flexible plastic pipe, grey when for indoor use and blue or black for outdoor usage. Various fittings are made with both metal and plastic. Insert fittings are then used to join sections of polybutylene pipe.
For homes with copper plumbing situated in the slab.
Slab leaks are generated by copper or some other piping becoming corroded from certain soil and water conditions under the floor of the house.
Symptoms of a Slab Leak:
- Water leaking through the foundation.
- Water sounds like it is running even when no faucets are on.
- Water meter displays the water is running even though the water is shut off.
- Abnormally substantial water charges.
- Others who live nearby have had a leaking slab.
- You experienced a previous slab leak.
Best things about Copper Repiping
- Higher water pressure
- Forget about rust color or foul tasting water
- Sparkling clean, clear water
- Having the capability to turn on several faucets at once
- Extremely high quality plumbing with no more leaky water lines.
- No skin scalding in your shower if somebody turns on the faucet or flushes.
- Greater peace of mind since your piping system is protected.
- Beneficial selling point for your property.
If you hire a plumbing company or other company to get the job done, it’s likely going to set you back more in the long term when you consider that you’ll have to employ a drywall repair company to patch over the various repair points. When you retain the services of a repipe business that has a master patcher on staff such as Repipe Specialists, you will never be required to invest more money or time in getting the house back to original condition. From beginning to end, the PEX and Copper repipe operation normally takes merely 2 or 3 days.