Downey, CA PEX-Copper Repiping and Slab Leak Repairs
A Repipe is a course of action where the existing water lines in a house or a building are upgraded with new ones. All pipe fittings, supply lines and water valves are changed. this typically ends up in considerably better water pressure and more suitable water quality.
Should We Repipe our home in Downey, CA?
There are many reasons for why a person might need to replace the water pipes of your home.
For properties with galvanized plumbing:
Galvanized water pipes can be found in homes constructed through the 70s. A galvanized pipe is an iron water pipe which is coated with zinc to be protected from corrosion. Regretfully the zinc coating gradually wears away over the years exposing the iron material, and then oxidation buildup.
Popular Slab Leak Indicators:
Reduced Water Pressure – The key reason why could be the limitation of the water flow as a consequence of corrosion and rust buildup within the galvanized water pipe.
Rust Colored Water – Corrosion usually finds it’s way to the water fixtures. This means a high level stage of rust in the water lines.
Leaking Pipes – Leaks are commonly resulting from corrosion of the galvanized pipes. Undetectable leaks can develop in the walls, inside of the attic as well as underneath the house, creating the potential for severe damage to the property.
For buildings with polybutylene plumbing:
This style of plastic water pipe was traditionally used in the middle of the 70’s to early 90’s. At the time it had been accepted as the next technological advance for pipes and fittings. Polybutylene piping systems had been installed in millions of places of residence prior to being judged as highly defective. Practically 65% of homes built during this time frame still has this category of pipe in the home.
Polybutylene pipes have an extremely small life span, considering that chemical compounds in ordinary city-provided water makes it harden and develop into brittle. The fittings frequently burst first, followed by the pipe itself.
Polybutylene plumbing systems consist of flexible plastic pipe, grey when used inside and black or blue for outdoor usage. Many fittings are manufactured with both plastic and metal. Insert fittings are then used to join pieces of polybutylene pipe.
For houses with copper plumbing situated in the slab.
Slab leaks are caused by copper or other pipes becoming corroded from certain water and soil conditions under the floor of the house.
Symptoms of a Slab Leak:
- Water is leaking through your foundation.
- Water is running even when the faucets are turned off.
- Water meter displays water running even though your water is shut off.
- Extraordinarily significant water utility bills.
- Nearby neighbors already have experienced a leaking slab.
- You experienced a slab leak before.
Great things about Copper or PEX Repiping
- Raised water pressure
- You can forget about rusty or stinky water
- Really clean, crystal clear water
- The ability to use more than one faucet simultaneously
- Extremely high quality plumbing without having any more leaking pipes.
- No skin scalding from the shower if someone else turns on a faucet or flushes.
- Better reassurance because your piping system is dependable.
- Really good selling feature for the property.
When you hire a plumbing technician or other firm to get the job done, it’s very likely going to set you back more in the long run if you consider that you’ll have to retain the services of a drywall repair company to patch over the various repair points. Any time you employ the service of a repipe company which includes a master patcher on staff such as Repipe Specialists, you will never be required to spend extra money or time getting your household back to original condition. From beginning to end, the PEX and Copper repipe operation usually takes only two or three days.